Membrane Dissolved Oxygen Digital Electrode SUP.DO7000
DO digital sensor is designed for the water industry. Equipped with RS485 digital serial ports, it can be used for measuring the variation of DO value of water-dissolvent fluid system within the
measuring range. It has standard RS485 Modbus RTU protocol function and allows remote communicate with upper computer.
principle
The principle of the membrane-based digital dissolved oxygen electrode relies on electrochemical
sensing technology combined with gas diffusion. It employs a thin membrane as the sensor, where the concentration of dissolved oxygen in the solution is measured by detecting changes in electrical
conductivity or resistivity. The membrane facilitates the diffusion of oxygen gas from a gas chamber, typically filled with air, into the solution. The electrode utilizes the principle of electrochemical
oxidation-reduction reactions at the membrane interface to generate a current that is proportional to the dissolved oxygen concentration, thus enabling accurate digital measurement of dissolved oxygen levels in the solution.
| Parameters | |
| Measurement | DO value in water |
| Measure range | 0...20mg/l |
| Resolution | 0.01mg/l |
| Measuring accuracy | ± 2% |
| Pressure range | 0...2bar |
| Temperature range | 0...60 ℃ |
| Output signal Shell material Pipe thread | RS485, 4 20mA PC+316SS,ABS,POM M39*1.5, G3/4 |
| Cable length | 5m or customized |
| Respone time | 10s |
| Power supply mode | 12VDC |
| Protection grade | IP68 |
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
We use cookies to collect information about how you use this site. We use this information to make the website work as well as possible and improve our services.