SUP-LDG Insertion type electromagnetic flowmeter

Supmea Insertion type electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. In the electromagnetic flowmeter, the conductive medium in the measuring tube is equivalent to the conductive metal rod in the Faraday test, and the two electromagnetic coils at the upper and lower ends generate a constant magnetic field.

Characteristics

Size: DN100mm-DN3000mm
Nominal Pressure: 1.6MPa
Accuracy: 1.5%
Probe: ABS, Polyurethane
Electrode: SUS316L, Hastelloy B, Hastelloy C

  • Specification

Size DN100mm-DN3000mm
Nominal Pressure 1.6 Mpa
Accuracy 1.5%
Probe ABS, Polyurethane
Electrode SUS316L, Hastelloy B, Hastelloy C
Structure Type  Integral type, remote type
Medium Temperature -20~+80degC
Ambient Temperature -20~+60degC
Ambient Humidity  5~100%RH(Relative humidity) 
Measuring Range Max 15m/s
Conductivity >5us/cm
Protection Class IP65(Standard); IP68(Optional for remote type)
Process Connection 2'' Thread(Standard), 2'' Flange(Optional)
Output Signal 4-20mA/Pulse
Communication RS485(Standard), HART(Optional), GPRS/GSM(Optional)
Power Supply AC220V(Can be used for AC85-250V)
DC24V(Can be used for DC20-36V)
DC12V(Optional), Battery powered 3.6V(Optional)
Power Consumption <20W
Alarm Upper Limit Alarm / Lower Limit Alarm
Self-diagnosis Empty Pipe Alarm, Exciting Alarm
  • Introduction

The SUP-LDG insertion electromagnetic flowmeter is a type of flow meter that is designed to measure the flow of conductive liquids in large pipes. This type of flow meter is installed directly into the pipe and measures the flow of liquid by detecting the electromagnetic field that is generated by the flow. It consists of a probe that is inserted into the pipe and a transmitter that is mounted on the outside of the pipe.

The transmitter generates a magnetic field that is picked up by the probe, and the resulting voltage signal is proportional to the flow rate. Insertion electromagnetic flowmeters are typically used in large pipes where it is not feasible to install a full-bore flow meter, and they are commonly used in industries such as water treatment, wastewater treatment, and chemical processing. One of the advantages of an insertion electromagnetic flowmeter is that it can be installed without having to shut down the process, which can save time and money.

  • Measuring principle

The working principle of the Insertion type electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. In the electromagnetic flowmeter, the conductive medium in the measuring tube is equivalent to the conductive metal rod in the Faraday test, and the two electromagnetic coils at the upper and lower ends generate a constant magnetic field. When a conductive medium flows through, an induced voltage will be generated. Two electrodes inside the pipe measure the induced voltage generated. The measuring pipeline is electromagnetically isolated from the fluid and the measuring electrode through a non-conductive lining (rubber, Teflon, etc.)

Need more information?

Contact us for more details about our boilers,solutions and services