Applications: SUP-pH-5015 pH sensor used in PH measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells.
SUP-pH-5015 pH sensor
1.Long distance reference diffusion path, extends electrode life greatly in harsh environments.
Using PPS / PC shell, Up and down 3/4NPT pipe thread, easy installation, no need sheath, saving installation costs.
2.Electrode is made of high quality low-noise cable, make signal output length greater than 40 meters or more, without interference.
3.No supplemental dielectric, a little maintenance.
4.High accuracy, fast response, good repeatability.
5.With silver ions Ag / AgCL reference electrode.
6.Proper operation to extend service life
7.Side or vertically installation to the reaction tank or pipe.
|Zero point potential||7PH±0.5（25℃）|
|size||Up and down 3 / 4NPT pipe thread|
|Connection method||Low-noise cable leads directly|
Freely contact us: firstname.lastname@example.org email@example.com（Skype）
Installation of ph electrode
Schematic diagram of common installation method
①Side wall installation ②Flange mounted at the top ③Pipe installation ④Top installation ⑤Submersible installation ⑥Flow-through installation
The interface must be in 15°oblique angle, or it will affect the normal test and use of the electrode. We won’t be responsible for any results due to this.