SUP-RD904 Solid material radar level meter

SUP-RD904 Solid material Radar level meter with high frequency, measurement of solid and low dielectric constant of the best choice.

Characteristics

  • Range: 0~80 m
  • Accuracy: ±15mm 
  • Application:  Solid material, Strong dust, easy to crystallize, condensation occasion
  • Frequency Range: 26GHz

 

Tel.: +86 15868103947 (WhatApp)

Email : info@supmea.com

  • Specification
 Product  Radar level meter
 Model SUP-RD904
 Measure range 0-80 meters
 Application Solid material, Strong dust, easy to crystallize, condensation occasion
 Process Connection Universal flange
 Medium Temperature (-40~130)°C (standard type) (-40~230)°C (high temperature type)
 Process Pressure    -0.1 ~ 0.3MPa
 Accuracy ±25mm 
 Ingress protection IP67 
 Frequency Range 26GHz
 Signal Output 4-20mA (Two-wire/Four)
RS485/Modbus
 Power supply DC(6~24V)/ Four-wire
DC 24V / Two-wire

 

  • Introduction

SUP-RD904 Radar level meter adopts a recommended industry emission frequency of 26GHz. The measurement range of up to 80 meters, covering a large reservoir water level measurement.

radar level meter

 

  • Product Size

radar level meter

  • Installation guide
level meter Level meter Level meter installation
Be installed in the diameter of the 1/4 or 1/6.    Note: The minimum distance from the tank  wall should be 200mm. Note:  ① datum  ②The container center or axis of symmetry The top conical tank level, can be installed at  the top of the tank is intermediate, can guarantee  the measurement to the conical bottom  A feed antenna to the vertical alignment surface.    If the surface is rough, stack angle must be used   to adjust the angle of cardan flange of the antenna   to the alignment surface.    (Due to the solid surface tilt will cause the echo attenuation, even Loss of signal.)

Related Products

Need more information?

Contact us for more details about our boilers,solutions and services