Industrial Water Treatment On-line COD/Ammonia/Total Nitrogen/Total Phosphorous Analyzer Controller

The total reagent consumption for a single measurement isless than 3mL, and the maintenance cost is low. Automatically identify insufficient sample and reagentssupply to avoid no reagent measurement. Both the amount of toxic waste water and cleaningwaste water in a single measurement is less than 15ml. This is a device that combines four measurement functions, on-line COD analyzer, on-line ammonia analyzer, on-line total nitrogen analyzer, on-line total phosphorous analyzer.

Characteristics

Small Reagent Consumption

Separation of Toxic Waste Water and Cleaning Waste Water

Plunger Pump Quantitative

Double Optical Path Detection

Lack of Liquid Detection and Alarm

Automatic Compensation of Turbidity

Automatic Range Switching

Key Parameter Upload

Friendly Human-computer Interaction

Support IPv4 Network

  • Specification

 Measuring range   (0~100 / 200 / 500 / 1000 / 2000) mg/L
 Error  20% Range:±8%; 50% Range:±5%; 80% Range:±3%
 Repeatability   ≤3%
 24h low concentration drift  ±5 mg/L
 24h high concentration drift  ≤3%
 Minimum Maintenance Period  ≥168 h/time
 Digital communication  RS232、RS485、RJ45
 Analog communication  (4~20)mA input; (4~20)mA output
 Power requirements  (220±22)VAC;(50±1)Hz
 Ambient temperature  (5~40)℃
 Size  300mm×420mm×240mm (W×H×D)
 Weight  <15 Kg

 

 


                 

  • Introduction 

 

Industrial Water Treatment On-line COD/Ammonia/Total Nitrogen/Total Phosphorous Analyzer Controller

Need more information?

Contact us for more details about our boilers,solutions and services