Applications: SUP-pH-5013A pH sensor used in PH measurement is also called primary cell. The primary battery is a system whose function is to convert chemical energy into electrical energy. The voltage of this battery is called electromotive force (EMF). This electromotive force (EMF) consists of two half-cells.
|Product||PTFE pH sensor|
|Measurement range||0-14 pH|
|Zero potential point||7 ± 0.5 pH|
|Internal impedance||150-250 MΩ(25℃)|
|Practical response time||< 1 min|
|Installation size||Upper and Lower 3/4NPT Pipe Thread|
|Temp compensation||NTC 10 KΩ/Pt1000|
|Heat resistance||0-60℃ for general cables|
|Pressure resistance||4 bar at 25 ℃|
|Connection|| Low-noise cable|
SUP-pH-5013A pH sensor
1.Adopt international advanced solid dielectric and large area PTFE liquid junction, no clogging, easy maintenance.
2.Long distance reference diffusion path, extends electrode life greatly in harsh environments.
Using PPS / PC shell, Up and down 3/4NPT pipe thread, easy installation, no need sheath, saving installation costs.
3.Electrode is made of high quality low-noise cable, make signal output length greater than 40 meters or more, without interference.
4.No supplemental dielectric, a little maintenance.
5.High accuracy, fast response, good repeatability.
6.With silver ions Ag / AgCL reference electrode.
7.Proper operation to extend service life
8.Side or vertically installation to the reaction tank or pipe.
9.Four-fluorine material shell suitable for corrosive liquid testing.
Choose pH electrode
Offers a full range of ph electrodes for measuring different media. Such as sewage, pure water, drinking water etc.
Installation of ph electrode
Schematic diagram of common installation method
①Side wall installation ②Flange mounted at the top ③Pipe installation ④Top installation ⑤Submersible installation ⑥Flow-through installation
The interface must be in 15°oblique angle, or it will affect the normal test and use of the electrode. We won’t be responsible for any results due to this.