Location: Home > Products > Analytics
SUP-DM2800 Dissolved Oxygen meter
  • SUP-DM2800 Dissolved Oxygen meter
  • SUP-DM2800 Dissolved Oxygen meter
  • SUP-DM2800 Dissolved Oxygen meter
  • SUP-DM2800 Dissolved Oxygen meter
SUP-DM2800 Dissolved Oxygen meter
Category: DO meter
Views: 263
Applications: SUP-DM2800 Dissolved oxygen is the measure of oxygen dissolved in an aqueous solution. Polarographic measurement principle, the dissolution value depends on the temperature of the aqueous solution, pressure and salinity in solution. The meter uses a liquid crystal display for measuring and displaying DO and medium temperature values, with analog and digital signal outputs and control functions.
Specification

SUP-DM2800 dissolved oxygen meter

dissolved oxygen meter.jpg



Installation

Host is fixed: the transmitter can be Paneled, Piped, wall-mounted installation.

Panel installation: requested to stay in the power distribution box on the Panel 138X138mm Square hole, the transmitters are attached to cage back into, and 4 M5 tighten screws. 



Tested units

% / ppm / mg/l / TEMP.

Range

%

0600 %According to the electrode)

mg/l

060.00 mg/lAccording to the electrode)

ppm

060.00 ppmAccording to the electrode)

TEMP

0100°CAccording to the electrode)

Resolution

%

0.1 %

mg/l

0.01 mg/l / 0.001 mg/l

ppm

0.01 ppm / 0.001ppm

TEMP

0.1C

Accuracy

%

±0.5% of reading ±1Digit

mg/l

±0.5% of reading ±1Digit

ppm

±0.5% of reading ±1Digit

TEMP

±0.2°C± 1Digit with temperature correction

Temperature compensation

0~50°C NTC30K/NTC22K automation compensation

0~50°C manual temperature compensation

Salinity compensation

0.045.0 ppt manual compensation

Pressure compensation

Compensation range0.5002.500bar or 7.2536.25psi manual adjustment

Calibration mode

Single point or two points calibrations

Working environment temperature

050°C

Storage environment temperature

-1070°C

Display

Large backlight LCD display, automatic and manual backlight sensor selection

Output current 1

Isolation-programming 4~20mA corresponding Dissolved oxygen Measuring range, maximum load 500 W

Output current 2

Isolation programming 4~20mA corresponding the temperature range, Max. load 500 W

Communication interface

Relay control

Contact output

RELAY ON/OFF ,240VAC 0.5A Max.


Setting

Set of two independent HI/LO Control point , Hysteresis setting

Cleaning setting

ON 0~9999 seconds / OFF 0~999.9 hours

Protection level

IP65

Power supply

100V~240VAC±10%,50/60Hz

20V~40VDC, Imax.=0.5A

Installation methods

Wall mounted/ Piped / Paneled

Meter size

144 mm ´ 144 mm ´ 115 mm (H´W´D)

Hole size

138 mm ´ 138 mm (H´W)

Weight

0.8Kg

Copyright@Supmea Automation
Address:No.600,No.21 Street, Hangzhou Economic&Technological Development Area, Hangzhou,China
Email: info@supmea.com
Follow us on :
  • *NAME:
  • *SELECT PRODUCT TYPE:
  • *EMAIL:
  • PHONE NUMBER:
  • *COMMENTS: